Concrete Pouring Services in Annapolis
Creating Strong, Level Concrete Slabs
So many large home improvement projects start with pouring concrete.
Building a new garage? It will be sitting on a concrete slab.
Building a new patio or outdoor entertainment area? Chances are at least part of it will be concrete.
Adding an in-ground pool? It will likely have a concrete deck.
At Alliance Inc., we know how important having a well-poured concrete slab can be to your renovation project. Whether it be your standard driveway or sidewalk pour or stamped or decorative concrete for a patio or walkway, we will work with you to make sure the concrete fits the specifications and design you are looking for.
What is the process for pouring a new concrete driveway or other slab?
- Consultation: We meet with you discuss the scope of the project, as well as all of your options. Once a decision has been made, we work with you to establish a work date that fits your schedule.
- Subgrade Preparation: If there was a previous slab and the existing foundation is adequate, we will grade and compact it for optimal strength. If not, new aggregate will be placed and compacted.
- Setting the Forms: Forms will be placed around the edges with a grid-reinforcing steel throughout, designed to provide longevity to the concrete.
- Pour and Level: Our concrete mix will include additives to further strengthen the mix. The concrete is poured into the forms and then our crew levels the pour — this is called “screeding.”
- Finishing: As concrete sets quickly, the finishing of it takes place immediately using a combination of power and/or hand tools.
- Curing: After the concrete is finished, we use a cure agent on the surface, which will prevent water loss for the next month. The concrete will take about 7 days to cure before it can be used. We also recommend keeping people and pets off the surface for several hours after we’ve left the site.
Built for Durability and Long-Term Performance
Concrete work requires attention to detail at every stage, from base preparation to curing. Our process is designed to produce slabs that hold up to daily use, seasonal changes, and long-term wear.
Concrete Pouring Services FAQs
How long does a concrete slab take to cure?
Concrete begins to set within hours, but curing is a longer process. Most concrete slabs can be walked on within 24–48 hours and used after about 7 days. Full strength develops over approximately 28 days. Proper curing helps prevent cracking and improves long-term durability.
How thick should a concrete slab be?
The required thickness depends on how the slab will be used.
- Sidewalks and patios are typically 4 inches thick
- Driveways often require 4–6 inches
- Garage floors and shop slabs may need additional thickness and reinforcement
We evaluate each project to ensure the slab meets structural and usage requirements.
Do you install reinforcement in concrete slabs?
Yes. Reinforcement such as steel rebar or wire mesh is commonly used to improve strength and reduce cracking. The type and placement of reinforcement depend on the size of the slab, soil conditions, and intended use.
Can concrete be poured over an existing slab?
In some cases, concrete can be poured over an existing slab, but only if the base is structurally sound and properly prepared. We assess the condition of the existing concrete to determine whether resurfacing or removal is the better long-term solution.
How soon can I drive or park on a new concrete driveway?
We recommend waiting at least 7 days before driving or parking vehicles on a new concrete driveway. This allows the slab to gain sufficient strength and helps prevent surface damage or cracking.
What causes concrete to crack?
Concrete cracking can result from soil movement, improper subgrade preparation, temperature changes, or lack of reinforcement. While minor cracking can be normal, professional preparation and installation significantly reduce the risk of structural issues.
Do you offer decorative or stamped concrete?
Yes. In addition to standard concrete pours, we offer decorative and stamped concrete options for patios, walkways, and outdoor living spaces. These finishes provide the durability of concrete with enhanced visual appeal.
Searching for a Concrete Pouring Contractor Near You in the Annapolis Area? Contact Us Today
Call us at 667-786-4914 to for more information or to schedule an appointment or book an appointment online now.